Timeline
03/19/2017:
- 11:04 Ticket #69 (Invoking trace_stack in admin mode crashes Multics) created by
- If you invoke the "trace_stack" ("ts") command from admin mode, the …
03/15/2017:
- 12:09 Ticket #68 (instr_speed can't handle MIPS values 10 or greater) created by
- instr_speed reports: MIPS AVE = 1.62707446e1, TIME AVE = 221, 61 …
03/14/2017:
- 16:03 Ticket #67 (Typo in _imft_std_commands.incl.pl1) created by
- '_imft_std_commands.incl.pl1' contains: /* Standard command/reply …
03/13/2017:
- 19:58 Ticket #66 ('instr_speed' command handles MIPS > 9 poorly) created by
- When the CPU speed hit 16 MIPS, instr_speed reported: MIPS AVE = …
- 14:53 Ticket #4 (Remove base_system.ini and Devices.txt from QuickStart) updated by
- Actually, we should leave Devices.txt in the QuickStart ZIP file for …
03/10/2017:
- 18:03 Ticket #65 ("x repair" (admin.ec) with no arguments causes asdump) updated by
-
Status, Version changed
- 18:03 Ticket #65 ("x repair" (admin.ec) with no arguments causes asdump) created by
- If you invoke the operator command "x repair" without any other …
03/02/2017:
- 15:35 Ticket #33 (Install process does not create names needed for upgrade.) updated by
- Note: this was "fixed" in an MR12.6 release by adding these …
- 15:34 Ticket #33 (Install process does not create names needed for upgrade.) updated by
- The current cold boot installation instructions include the following: …
03/01/2017:
- 15:59 Ticket #64 (Fix damaged source archives from ACTC tape (MCR10012)) closed by
- fixed
- 15:59 Ticket #64 (Fix damaged source archives from ACTC tape (MCR10012)) created by
- Some of the source archives installed from the ACTC tapes are damaged …
- 15:57 Ticket #63 (Fix object_lib_ to terminate segments it initiates (MCR10011)) closed by
- fixed
- 15:57 Ticket #63 (Fix object_lib_ to terminate segments it initiates (MCR10011)) created by
- If you use dprint to queue a segment up for printing, the segment …
- 15:55 Ticket #23 (acquire_resource incorrectly formats error message (MCR10010)) updated by
-
Summary changed
- 15:55 Ticket #62 (Fix more errors due to non-support of 4-character time zones (MCR10009)) closed by
- fixed
- 15:55 Ticket #62 (Fix more errors due to non-support of 4-character time zones (MCR10009)) created by
- Fix remaining references to (en de)clode_clock_value_ that were not …
- 15:53 Ticket #61 (Fix map355 to not access variables before setting them (MCR10008)) closed by
- fixed
- 15:53 Ticket #61 (Fix map355 to not access variables before setting them (MCR10008)) created by
- Reorder argument processing code in map355 so as to check options …
- 15:52 Ticket #60 (Fix acct_start_up.ec to set appropriate access on logs (MCR10007)) closed by
- fixed
- 15:52 Ticket #60 (Fix acct_start_up.ec to set appropriate access on logs (MCR10007)) created by
- Fix acct_start_up.ec to give w access to >sc1>syserr_logs> and …
- 15:51 Ticket #59 (Fix history_comment to support 4-digit years) closed by
- fixed
- 15:51 Ticket #59 (Fix history_comment to support 4-digit years) created by
- Fix history_comment to use 4-digit years and be able to handle current …
- 15:50 Ticket #58 (Fix lib_fetch_ to terminate segments initiated by it (MCR10005)) closed by
- fixed
- 15:50 Ticket #58 (Fix lib_fetch_ to terminate segments initiated by it (MCR10005)) created by
- MCR10005 addresses this issue.
- 15:48 Ticket #21 (trace_error_halt_ missing from bound_trace_ (MCR10004)) updated by
-
Summary changed
- 15:47 Ticket #57 (Fix support for 4-character time zones (MCR10003)) closed by
- fixed
- 15:47 Ticket #57 (Fix support for 4-character time zones (MCR10003)) created by
- Fix encode_date_time_ and decode_date_time_ as well as all callers of …
- 15:46 Ticket #22 (ALM buffer overrun (MCR10002)) updated by
-
Summary changed
- 15:46 Ticket #22 (ALM buffer overrun (MCR10002)) updated by
- http://swenson.org/multics_wiki/downloads/doc/MCR10002.txt addresses …
- 15:45 Ticket #34 (Fix scas_init to be more tolerant of processor speed (MCR10001)) updated by
-
Summary changed
- 15:44 Ticket #56 (Allow load_fnp_ to load old and new FNP images (MCR10000)) closed by
- fixed
- 15:44 Ticket #56 (Allow load_fnp_ to load old and new FNP images (MCR10000)) created by
- Remove date/time consistency checks in load_fnp_ allowing images older …
- 15:42 Ticket #55 (Add input_history command (MCR10013)) closed by
- fixed
- 15:41 Ticket #55 (Add input_history command (MCR10013)) created by
- Add input_history command to allow command line recall/editing with …
- 15:40 Ticket #54 (Add call command (MCR10014)) closed by
- fixed
- 15:40 Ticket #54 (Add call command (MCR10014)) created by
- Add call command to allow calling subroutines from command line. …
- 15:38 Ticket #32 (Emacs make-wall-chart command displays dates past 1999 incorrectly ...) updated by
-
Summary changed
- 15:37 Ticket #28 (Typo in mc.incl.alm (MCR10016)) updated by
-
Summary changed
- 15:36 Ticket #12 (Fix misspelling in acct_start_up.ec (completeion => completion) (MCR10018)) updated by
-
Summary changed
- 15:36 Ticket #16 (Fix typo in x.repair.info (MCR10019)) updated by
-
Summary changed
- 15:35 Ticket #18 (Typo in generate_mst.info (MCR10020)) updated by
-
Summary changed
- 15:34 Ticket #13 (Fix incorrect padding due to typo in kst_attributes.incl.pl1 (MCR10021)) updated by
-
Summary changed
- 15:34 Ticket #37 (pcref sometimes fails to locate all references (MCR10022)) updated by
-
Summary changed
- 15:32 Ticket #29 (pl1_time_ calls decode_clock_value_$time and ignores the returned ...) closed by
- fixed: http://swenson.org/multics_wiki/downloads/doc/MCR10023.txt address …
- 15:31 Ticket #37 (pcref sometimes fails to locate all references (MCR10022)) updated by
-
Summary changed
- 15:31 Ticket #37 (pcref sometimes fails to locate all references (MCR10022)) updated by
- http://swenson.org/multics_wiki/downloads/doc/MCR10022.txt addresses …
- 15:29 Ticket #40 (Pascal external entrypoints fail when invoked as a command (MCR10025)) updated by
-
Summary changed
http://swenson.org/multics_wiki/downloads/doc/MCR-10025_v1.0.pdf … - 15:19 Ticket #53 (Correct Spelling Error in poll_mpc.pl1 (MCR10026)) updated by
- http://swenson.org/multics_wiki/downloads/doc/MCR10026.pdf addresses …
- 15:19 Ticket #53 (Correct Spelling Error in poll_mpc.pl1 (MCR10026)) closed by
- fixed
- 15:19 Ticket #53 (Correct Spelling Error in poll_mpc.pl1 (MCR10026)) created by
- An informative message issued by poll_mpc incorrectly spells the word …
- 15:18 Ticket #52 (Correct Spelling Error in dm_per_system_.pl1 (MCR10027)) updated by
- http://swenson.org/multics_wiki/downloads/doc/MCR10027.pdf addresses …
- 15:17 Ticket #52 (Correct Spelling Error in dm_per_system_.pl1 (MCR10027)) closed by
- fixed
- 15:17 Ticket #52 (Correct Spelling Error in dm_per_system_.pl1 (MCR10027)) created by
- An error message issued by dm_per_system_ (part of Data Management) …
- 15:15 Ticket #39 (Compilation error in distributed software (MCR10028)) updated by
-
Summary changed
- 15:13 Ticket #51 (ask for promo codes) closed by
- invalid
- 15:12 Ticket #9 (pl1 generates incorrect code for string concatenation in some cases ...) updated by
-
Summary changed
- 15:09 Ticket #50 (Add VT102_132C_50L and VT102_132_78L TTF entries (MCR10033)) updated by
-
Summary changed
- 14:58 Ticket #50 (Add VT102_132C_50L and VT102_132_78L TTF entries (MCR10033)) closed by
- fixed
- 14:58 Ticket #46 (Need a command/AF interfaces to the interpret_ptr_ subroutine. (MCR10031)) closed by
- fixed
- 14:57 Ticket #45 (cv_ptr_ function should handle pointers with hardcore segment numbers. ...) closed by
- fixed
- 14:57 Ticket #43 (The library_pathname command/AF should accept -container (MCR10034)) closed by
- fixed
- 14:57 Ticket #42 (The library_pathname AF returns only last matching path. (MCR10034)) closed by
- fixed
- 14:56 Ticket #44 (interpret_ptr_ reports incorrect ring number, omits bitoff field (MCR10030)) closed by
- fixed
- 14:56 Ticket #48 (JhFmXW http://www.FyLitCl7Pf7ojQdDUOLQOuaxTXbj5iNG.com) closed by
- invalid
- 14:55 Ticket #47 (Change probe's format_pointer_ routine to use interpret_ptr_ (MCR10035)) closed by
- fixed
- 14:54 Ticket #49 (input_history_ bug when counting lines in .history segment (MCR10032)) closed by
- fixed
02/28/2017:
- 18:40 Ticket #51 (ask for promo codes) created by
- The user-friendliness and excellent attributes it has are exactly what …
02/20/2017:
- 16:53 Ticket #45 (cv_ptr_ function should handle pointers with hardcore segment numbers. ...) updated by
- For details of this repair, see: …
- 16:53 Ticket #45 (cv_ptr_ function should handle pointers with hardcore segment numbers. ...) updated by
-
Summary changed
- 16:47 Ticket #46 (Need a command/AF interfaces to the interpret_ptr_ subroutine. (MCR10031)) updated by
-
Summary changed
- 16:46 Ticket #43 (The library_pathname command/AF should accept -container (MCR10034)) updated by
-
Summary changed
For details of this repair, see: … - 16:44 Ticket #42 (The library_pathname AF returns only last matching path. (MCR10034)) updated by
-
Summary changed
- 16:44 Ticket #47 (Change probe's format_pointer_ routine to use interpret_ptr_ (MCR10035)) updated by
-
Summary changed
- 16:43 Ticket #44 (interpret_ptr_ reports incorrect ring number, omits bitoff field (MCR10030)) updated by
-
Summary changed
- 16:42 Ticket #49 (input_history_ bug when counting lines in .history segment (MCR10032)) updated by
-
Summary changed
- 16:40 Ticket #47 (Change probe's format_pointer_ routine to use interpret_ptr_ (MCR10035)) updated by
- For details of this repair, see: …
- 16:31 Ticket #42 (The library_pathname AF returns only last matching path. (MCR10034)) updated by
- For details of this repair, see: …
Note:
See TracTimeline
for information about the timeline view.
